Skip to content
Wonderland

sample

Lexicon: eco.wonderland.workcell.common.data.defs
Type: string

  • acceleration: Positive rate of change of velocity.
  • accumulated-time: Accumulated time for an activity or event.
  • angle: Angular position.
  • angular-acceleration: Positive rate of change of angular velocity.
  • angular-velocity: Rate of change of angular position.
  • axis-feedrate: Feedrate of a linear axis.
  • capacity-fluid: Maximum amount of fluid that can be held by a container.
  • capacity-spatial: Maximum amount of material that can be held by a container.
  • concentration: Percentage of one component within a mixture of components.
  • conductivity: Ability of a material to conduct electricity.
  • cutting-speed: Speed difference (relative velocity) between the cutting mechanism and the surface of the workpiece it is operating on.
  • density: Volumetric mass of a material per unit volume of that material.
  • deposition-acceleration-volumetric: Rate of change in spatial volume of material deposited in an additive manufacturing process.
  • deposition-density: Density of the material deposited in an additive manufacturing process per unit of volume.
  • deposition-mass: Mass of the material deposited in an additive manufacturing process.
  • deposition-rate-volumetric: Rate at which a spatial volume of material is deposited in an additive manufacturing process.
  • deposition-volume: Spatial volume of material to be deposited in an additive manufacturing process.
  • displacement: Change in position of an object.
  • electrical-energy: wattage used or generated by a component over an interval of time.
  • equipment-timer: Amount of time a piece of equipment or a sub-part of a piece of equipment has performed specific activities.
  • fill-level: Amount of a substance remaining compared to the planned maximum amount of that substance.
  • flow: Rate of flow of a fluid.
  • frequency: Number of occurrences of a repeating event per unit time.
  • length: Length of an object.
  • linear-force: force applied to a mass in one direction only.
  • load: Actual versus the standard rating of a piece of equipment.
  • mass: Mass of an object(s) or an amount of material.
  • path-feedrate: Feedrate for the axes, or a single axis, associated with a path component.
  • path-feedrate-per-revolution: Feedrate for the axes, or a single axis.
  • path-position: Position of a control point associated with a controller or a path.
  • ph: Acidity or alkalinity of a solution.
  • position: Point along an axis in a cartesian coordinate system.
  • power-factor: Ratio of real power flowing to a load to the apparent power in that AC circuit.
  • pressure: Force per unit area measured relative to atmospheric pressure. Commonly referred to as gauge pressure.
  • process-timer: Amount of time a piece of equipment has performed different types of activities associated with the process being performed at that piece of equipment.
  • resistance: Degree to which a substance opposes the passage of an electric current.
  • rotary-velocity: Rotational speed of a rotary axis.
  • sound-level: Sound level or sound pressure level relative to atmospheric pressure.
  • strain: Amount of deformation per unit length of an object when a load is applied.
  • temperature: Degree of hotness or coldness measured on a definite scale.
  • tension: Force that stretches or elongates an object.
  • tilt: Angular displacement.
  • torque: Turning force exerted on an object or by an object.
  • velocity: Rate of change of position of a component.
  • viscosity: Fluid’s resistance to flow.
  • volt-ampere: Apparent power in an electrical circuit, equal to the product of root-mean-square (RMS) voltage and RMS current (commonly referred to as VA).
  • volt-ampere-reactive: Reactive power in an AC electrical circuit (commonly referred to as VAR).
  • volume-fluid: Fluid volume of an object or container.
  • volume-spatial: Geometric volume of an object or container.
  • wattage: Power flowing through or dissipated by an electrical circuit or piece of equipment.
  • amperage-ac: Electrical current that reverses direction at regular short intervals.
  • amperage-dc: Electric current flowing in one direction only.
  • voltage-ac: Electrical potential between two points in an electrical circuit in which the current periodically reverses direction.
  • voltage-dc: Electrical potential between two points in an electrical circuit in which the current is unidirectional.
  • x-dimension: Dimension of an entity relative to the X direction of the referenced coordinate system.
  • y-dimension: Dimension of an entity relative to the Y direction of the referenced coordinate system.
  • z-dimension: Dimension of an entity relative to the Z direction of the referenced coordinate system.
  • diameter: Dimension of a diameter.
  • orientation: Angular position of a plane or vector relative to a cartesian coordinate system
  • humidity-relative: Amount of water vapor present expressed as a percent to reach saturation at the same temperature.
  • humidity-absolute: Amount of water vapor expressed in grams per cubic meter.
  • humidity-specific: Ratio of the water vapor present over the total weight of the water vapor and air present expressed as a percent.
  • observation-update-rate: Average rate of change of values for data items in the MTConnect streams. The average is computed over a rolling window defined by the implementation.
  • asset-update-rate: Average rate of change of values for assets in the MTConnect streams. The average is computed over a rolling window defined by the implementation.
  • pressurization-rate: Change of pressure per unit time.
  • deceleration: Negative rate of change of velocity.
  • angular-deceleration: Negative rate of change of angular velocity.
  • pressure-absolute: Force per unit area measured relative to a vacuum.
  • openness: Percentage open where 100% is fully open and 0% is fully closed.
  • dew-point: Temperature at which moisture begins to condense, corresponding to saturation for a given absolute humidity.
  • gravitational-force: Force relative to earth’s gravity.
  • gravitational-acceleration: Acceleration relative to Earth’s gravity of 9.80665 meter/second^2.
  • battery-capacity: Maximum rated charge a battery is capable of maintaining based on the battery discharging at a specified current over a specified time period.
  • discharge-rate: Value of current being drawn from the component.
  • charge-rate: Value of the current being supplied to the component for the purpose of charging.
  • battery-charge: Value of the battery’s present capacity expressed as a percentage of the battery’s maximum rated capacity.
  • settling-error: Difference between actual and commanded position at the end of a motion.
  • following-error: Difference between actual and commanded position at any specific point in time during a motion.
  • settling-error-linear: Difference between the commanded encoder/resolver position, and the actual encoder/resolver position when motion is complete.
  • settling-error-angular: Angular difference between the commanded encoder/resolver position, and the actual encoder/resolver position when motion is complete.
  • following-error-linear: Difference between the commanded encoder/resolver position and the actual encoder/resolver position at any specified point in time during a motion.
  • following-error-angular: Angular difference between the commanded encoder/resolver position and the actual encoder/resolver position at any specified point in time during a motion.
  • displacement-linear: Absolute value of the change in position along a vector.
  • displacement-angular: Absolute value of the change in angular position around a vector
  • position-cartesian: Point in a cartesian coordinate system.
  • resistivity: Inability of a material to conduct electricity.
  • fill-height: Amount of a substance in a container.
  • particle-count: Number of particles counted by their size or other characteristics.
  • particle-size: Size of particles counted by their size or other characteristics.

Referenced By

Section titled “Referenced By”

Schema

Section titled “Schema”
{
  "type": "string",
  "knownValues": [
    "acceleration",
    "accumulated-time",
    "angle",
    "angular-acceleration",
    "angular-velocity",
    "axis-feedrate",
    "capacity-fluid",
    "capacity-spatial",
    "concentration",
    "conductivity",
    "cutting-speed",
    "density",
    "deposition-acceleration-volumetric",
    "deposition-density",
    "deposition-mass",
    "deposition-rate-volumetric",
    "deposition-volume",
    "displacement",
    "electrical-energy",
    "equipment-timer",
    "fill-level",
    "flow",
    "frequency",
    "length",
    "linear-force",
    "load",
    "mass",
    "path-feedrate",
    "path-feedrate-per-revolution",
    "path-position",
    "ph",
    "position",
    "power-factor",
    "pressure",
    "process-timer",
    "resistance",
    "rotary-velocity",
    "sound-level",
    "strain",
    "temperature",
    "tension",
    "tilt",
    "torque",
    "velocity",
    "viscosity",
    "volt-ampere",
    "volt-ampere-reactive",
    "volume-fluid",
    "volume-spatial",
    "wattage",
    "amperage-ac",
    "amperage-dc",
    "voltage-ac",
    "voltage-dc",
    "x-dimension",
    "y-dimension",
    "z-dimension",
    "diameter",
    "orientation",
    "humidity-relative",
    "humidity-absolute",
    "humidity-specific",
    "observation-update-rate",
    "asset-update-rate",
    "pressurization-rate",
    "deceleration",
    "angular-deceleration",
    "pressure-absolute",
    "openness",
    "dew-point",
    "gravitational-force",
    "gravitational-acceleration",
    "battery-capacity",
    "discharge-rate",
    "charge-rate",
    "battery-charge",
    "settling-error",
    "following-error",
    "settling-error-linear",
    "settling-error-angular",
    "following-error-linear",
    "following-error-angular",
    "displacement-linear",
    "displacement-angular",
    "position-cartesian",
    "resistivity",
    "fill-height",
    "particle-count",
    "particle-size"
  ]
}
© Lookinglass 2026